Electromechanical Engineering Technology – Automation (EMA)
Starts in January, May, September
Campus
Duration
6 Semesters (3 Years)Credential Awarded
Ontario College Advanced DiplomaCourses
Delivery: At Seneca, courses are delivered in the following formats: online, in-person, hybrid (an online, in-person combination) or flexible (offered in-person and online at the same time).
The chart below outlines the delivery options available for each course in this program. For some academic terms, there may be more than one delivery option available. You’ll be able to select your preferred options when building your course schedule during open enrolment.
Preferences for course delivery will be considered on a first come, first served basis.
International students: the impact of studying from outside of Canada and Post-Graduation Work Permit (PGWP) eligibility differs significantly based on when you start your program. Please review the PGWP eligibility before choosing your program and course delivery.
Semester 1
| Course Code | Course Name | Winter | Summer | Fall |
|---|---|---|---|---|
| COM101
or COM111 |
Communicating Across Contexts
or Communicating Across Contexts (Enriched) |
Hybrid
Online In-person |
Hybrid
Online In-person |
Hybrid
Online In-person |
| ETY155 | Electricity | In-person | In-person | In-person |
| ICO155 | Introduction to Computers | In-person | In-person | In-person |
| LIN155 | Electronic Lab Instrumentation and Techniques | In-person | In-person | In-person |
| MTH147 | Mathematics with Foundations | In-person | In-person | In-person |
| PRG155 | Programming Fundamentals Using "C" | In-person | In-person | In-person |
Semester 2
| Course Code | Course Name | Winter | Summer | Fall |
|---|---|---|---|---|
| CAD255 | Mechanical Designs and Drawing | In-person | In-person | In-person |
| DGS266 | Digital Electronics and Introduction to PLC |
Hybrid
In-person |
Hybrid
In-person |
Hybrid
In-person |
| ELM253 | AC Circuits for Electrical Systems | In-person | In-person | In-person |
| IPS255 | Interpersonal Skills in the Engineering Workplace | Hybrid | Hybrid | Online |
| MTH255 | Mathematics | In-person | In-person | In-person |
| THY200 | Machining Theory - Automation | In-person | In-person | In-person |
Semester 3
| Course Code | Course Name | Winter | Summer | Fall |
|---|---|---|---|---|
| CAD355 | Electrical Designs and Drawings | In-person | In-person | In-person |
| CSF453 | Control Systems Fundamentals | In-person | In-person | In-person |
| ECP455 | Engineering Codes and Practices |
Hybrid
In-person |
Hybrid
In-person |
Hybrid
In-person |
| MEC355 | Mechatronics: Pneumatics and Hydraulic | In-person | In-person | In-person |
| MME355 | Mechanics and Machine Elements | In-person | In-person | In-person |
| WTP100 | Work Term Preparation | Online | Online | Online |
| plus: General Education Course (1) | ||||
| WTP100 - Work-Integrated Learning option only |
Work-Integrated Learning Term 1
| Course Code | Course Name | Winter | Summer | Fall |
|---|---|---|---|---|
| EMA331 | Electromechanical Engineering Technology - Automation, Co-op |
Hybrid
Online In-person |
Hybrid
Online In-person |
Hybrid
Online In-person |
| EMA331 - Work-Integrated Learning option only |
Semester 4
| Course Code | Course Name | Winter | Summer | Fall |
|---|---|---|---|---|
| ELM453 | Motors and Transformers | Hybrid | Hybrid | Hybrid |
| MEC455 | Mechatronics Concepts | In-person | In-person | In-person |
| MMF455 | Material and Machining Fundamentals | In-person | In-person | In-person |
| PCS455 | Process Control |
Hybrid
In-person |
Hybrid
In-person |
Hybrid
In-person |
| TEC400 | Technical Communications |
Flexible
Online |
Flexible
Online |
Flexible
Online |
| TIA555 | Totally Integrated Automation |
Hybrid
In-person |
Hybrid
In-person |
Hybrid
In-person |
Work-Integrated Learning Term 2
| Course Code | Course Name | Winter | Summer | Fall |
|---|---|---|---|---|
| EMA332 | Electomechanical Engineering Technology - Automation, Co-op II |
Hybrid
Online In-person |
Hybrid
Online In-person |
Hybrid
Online In-person |
| EMA332 - Work-Integrated Learning option only |
Semester 5
| Course Code | Course Name | Winter | Summer | Fall |
|---|---|---|---|---|
| AUT555 | Advanced Automation | In-person | In-person | In-person |
| CAD555 | Electrical and Mechanical Design and Simulation | In-person | In-person | In-person |
| CNC555 | CNC Technology | In-person | In-person | In-person |
| IOT555 | Industrial Internet of Things |
Hybrid
In-person |
Hybrid
In-person |
Hybrid
In-person |
| MOM555 | Manufacturing Operations Management | In-person | In-person | In-person |
| ROB555 | Robtics Basics | In-person | In-person | In-person |
Semester 6
| Course Code | Course Name | Winter | Summer | Fall |
|---|---|---|---|---|
| CMA655 | Cloud and Manufacturing Data Analytics | In-person | In-person | In-person |
| ROB655 | Robotic Applications | In-person | In-person | In-person |
| SIM655 | Simulation for Design and Manufacturing | In-person | In-person | In-person |
| TPJ653 | Capstone Project | In-person | In-person | In-person |
| plus: General Education Course (1) | ||||
| plus: Professional Options (1) |
Professional Options
Semester 6
Course Code Course Name Winter Summer Fall ACC106 Accounting I TBD TBD TBD BAM101 Introduction to Business Administration TBD TBD TBD PHY354 Physics for Electronics Hybrid Hybrid Hybrid PPE655 Engineering Ethics and Professional Practice Hybrid
In-personHybrid
In-personHybrid
In-personTHY201 Machining Theory TBD TBD TBD TLD201 Tool Design TBD TBD TBD