IPC222 - IPC 7711/7721 CIT Recertification

Outline info
Semester
School
Last revision date 2017-11-21 10:33:33.033
Last review date 2017-11-21 10:33:46.611


Subject Title
IPC 7711/7721 CIT Recertification

Subject Description
This is a two (2) day review of the standard targeted for Certified IPC Trainers who require recertification.  Candidates write open and closed book  examinations and they must rework, repair and modify to acceptable workmanship standards.

Note:  Training is conducted by Celestica in cooperation with Seneca college.

Credit Status
Non-Credit from Seneca.

Industry recognized certification from IPC, valid for 2 years.

Learning Outcomes
Upon successful completion of this subject the student will be able to:

  • Explain the general requirements in the standard as it applies to rework, repair and modification.
  • Demonstrate how to strip, tin and splice wires.
  • Demonstrate how to remove and replace SMT and PTH components using industry approved methods.
  • Demonstrate how to repair and modify PCBs (pad and trace damage, laminate, wire adds, etc.)
  • Teach the Application Specialist level course.

Cheating and Plagiarism
Each student should be aware of the College's policy regarding Cheating and Plagiarism. Seneca's Academic Policy will be strictly enforced.

To support academic honesty at Seneca College, all work submitted by students may be reviewed for authenticity and originality, utilizing software tools and third party services. Please visit the Academic Honesty site on http://library.senecacollege.ca for further information regarding cheating and plagiarism policies and procedures.

Discrimination/Harassment
All students and employees have the right to study and work in an environment that is free from discrimination and/or harassment. Language or activities that defeat this objective violate the College Policy on Discrimination/Harassment and shall not be tolerated. Information and assistance are available from the Student Conduct Office at student.conduct@senecacollege.ca.

Accommodation for Students with Disabilities
The College will provide reasonable accommodation to students with disabilities in order to promote academic success. If you require accommodation, contact the Counselling and Disabilities Services Office at ext. 22900 to initiate the process for documenting, assessing and implementing your individual accommodation needs.

Prerequisite(s)
The ideal candidates are IPC-7711/7721 Certified IPC Trainers requiring recertification to the standard.
Proof of certification is mandatory at the beginning of the class (i.e. Original certificate and official IPC letter of extension, if that was granted.)

Topic Outline
Quick overview of the topics covered in the initial certification as outlined below:

  • Wire SplicingT
  • hrough Hole Components Removal/ Replacement
  • Chip & MELF Components Removal/Replacement
  • Gull Wing Components Removal/Replacement
  • J-lead  Components Removal/Replacement
  • PCB Circuit Repair
  • PCB Laminate Repair
  • Jumper Wires
  • Conformal Coating Removal/Replacement

Mode of Instruction
Lecture, live on camera demonstration, hands-on practice, visuals.

Prescribed Texts
IPC-7711/7721 Standards
IPC Professional Training and Certification Policies and Procedures

Note: Everyone who successfully completes the program will receive instructional materials necessary for conducting Certified IPC Specialist Recertification Training.

Reference Material
None.

Required Supplies
None.

Promotion Policy

Grading Policy
A+ 90%  to  100%
A 80%  to  89%
B+ 75%  to  79%
B 70%  to  74%
C+ 65%  to  69%
C 60%  to  64%
D+ 55%  to  59%
D 50%  to  54%
F 0%    to  49% (Not a Pass)
OR
EXC Excellent
SAT Satisfactory
UNSAT Unsatisfactory

For further information, see a copy of the Academic Policy, available online (http://www.senecacollege.ca/academic-policy) or at Seneca's Registrar's Offices.



Modes of Evaluation
The student must prove their mastery of the specification by passing a 25 question open book and a 25 question closed book test with an average score of 80% or higher, and complete the workmanship skill tests at an acceptable level.

Grading Policy

80%-100%- SAT
0-79%   -     UNSAT

Coordinator
Norma Columbus

Approved by: Barb Shannon, Denis Gravelle, Sharon Estok