IPC320 - Certified IPC Trainer (CIT) J-STD-001

Outline info
Semester
School
Last revision date 2017-05-29 00:40:02.038
Last review date 2017-07-17 00:16:20.291


Subject Title
Certified IPC Trainer (CIT) J-STD-001

Subject Description
This CIT subject is a comprehensive subject providing a review of the document and hands-on soldering training addressing: Wire Preparation, Terminals, Through Hole and Surface Mount Technologies. Ideal candidates should have a background in electronic assembly, good hand dexterity and tasked to conduct the CIS course.

Note:  Training is conducted by Celestica in cooperation with Seneca college.

Credit Status
Non-Credit from Seneca.
Industry recognized certification from IPC, valid for 2 years.

Learning Outcomes
Upon successful completion of this subject the student will be able to:

Demonstrate mastery of the following at a Trainer level:
- Identify the general requirements of J-STD-001E
- Apply Wire, Terminal, PTH and SMT assembly requirements
- Improve the skills and ability to achieve acceptable workmanship
- Consistently and correctly apply the general soldered connection acceptance criteria (including lead free)
- Properly inspect PCBAs
- Demonstrate the ability to teach the Application specialist (CIS) course

Cheating and Plagiarism
Each student should be aware of the College's policy regarding Cheating and Plagiarism. Seneca's Academic Policy will be strictly enforced.

To support academic honesty at Seneca College, all work submitted by students may be reviewed for authenticity and originality, utilizing software tools and third party services. Please visit the Academic Honesty site on http://library.senecacollege.ca for further information regarding cheating and plagiarism policies and procedures.

Discrimination/Harassment
All students and employees have the right to study and work in an environment that is free from discrimination and/or harassment. Language or activities that defeat this objective violate the College Policy on Discrimination/Harassment and shall not be tolerated. Information and assistance are available from the Student Conduct Office at student.conduct@senecacollege.ca.

Accommodation for Students with Disabilities
The College will provide reasonable accommodation to students with disabilities in order to promote academic success. If you require accommodation, contact the Counselling and Disabilities Services Office at ext. 22900 to initiate the process for documenting, assessing and implementing your individual accommodation needs.

Prerequisite(s)
Recommended:
Ideal candidates should have a background in electronic assembly, excellent soldering skills and being tasked to conduct J-STD-001 Certified IPC Specialist Certification Course.

Topic Outline
•    Instructional skills and the roles and responsibilities of Certified IPC Trainers
•    General requirements, such as safety, tools and electrostatic discharge (ESD)
•    Wire and terminal assembly requirements, demonstrations and laboratory
•    Through hole technology requirements, demonstrations and laboratory
•    Surface mount technology requirements, demonstrations and laboratory
•    General soldered connection acceptance requirements (including Lead Free)
•    Machine and reflow soldering process requirements
•    Test methods and related standards
•    Using statistical process control methodology

Mode of Instruction
Lecture, live on camera demonstration, hands-on practice, visuals.

Prescribed Texts
•    J-STD -001 through 006 Standards (included in the course fee)
•    IPC Professional Training and Certification Policies and Procedures

Reference Material
None.

Required Supplies
None.

Promotion Policy

Grading Policy
A+ 90%  to  100%
A 80%  to  89%
B+ 75%  to  79%
B 70%  to  74%
C+ 65%  to  69%
C 60%  to  64%
D+ 55%  to  59%
D 50%  to  54%
F 0%    to  49% (Not a Pass)
OR
EXC Excellent
SAT Satisfactory
UNSAT Unsatisfactory

For further information, see a copy of the Academic Policy, available online (http://www.senecacollege.ca/academic-policy) or at Seneca's Registrar's Offices.



Modes of Evaluation
The student must prove their mastery of the specification by passing a 75 question open book and a 25 question closed book test with an average score of 80% or higher, and complete the workmanship skill tests at an acceptable level.

80% -100% - SAT
0 - 69% - UNSAT

Coordinator
Vince Bennici

Approved by: Barb Shannon, Denis Gravelle, Sharon Estok