IPC322 - IPC J-STD-001 CIT Recertification

Outline info
Last revision date 2018-07-20 11:29:56.091
Last review date 2018-07-20 11:30:07.822

Subject Title
IPC J-STD-001 CIT Recertification

Subject Description
This is a two (2) day review of the standard targeted for Certified IPC Trainers who require recertification.  Candidates write open and closed book examinations and they must assemble and solder to acceptable workmanship standards.

Note:  Training is conducted by Celestica in cooperation with Seneca college.

Credit Status
Non-Credit from Seneca.

Industry recognized certification from IPC, valid for 2 years.

Learning Outcomes
Upon successful completion of this subject the student will be able to:

Demonstrate mastery of the following at a Trainer level:

  • Identify the general requirements of J-STD-001E
  • Apply Wire, Terminal, PTH and SMT assembly requirements
  • Achieve acceptable workmanship
  • Consistently and correctly apply the general soldered connection acceptance criteria (including lead free)
  • Properly inspect PCBAs
  • Teach the Application specialist (CIS) course

Cheating and Plagiarism
Each student should be aware of the College's policy regarding Cheating and Plagiarism. Seneca's Academic Policy will be strictly enforced.

To support academic honesty at Seneca College, all work submitted by students may be reviewed for authenticity and originality, utilizing software tools and third party services. Please visit the Academic Honesty site on http://library.senecacollege.ca for further information regarding cheating and plagiarism policies and procedures.

All students and employees have the right to study and work in an environment that is free from discrimination and/or harassment. Language or activities that defeat this objective violate the College Policy on Discrimination/Harassment and shall not be tolerated. Information and assistance are available from the Student Conduct Office at student.conduct@senecacollege.ca.

Accommodation for Students with Disabilities
The College will provide reasonable accommodation to students with disabilities in order to promote academic success. If you require accommodation, contact the Counselling and Disabilities Services Office at ext. 22900 to initiate the process for documenting, assessing and implementing your individual accommodation needs.

The ideal candidates are J-STD-001 Certified IPC Trainers requiring the recertification to the standard.
Proof of certification is mandatory at the beginning of the class (i.e. Original certificate and official IPC letter of extension, if that was granted.)

Topic Outline
Quick overview of the topics covered in the initial certification as outlined below:

  • Instructional skills and the roles and responsibilities of Certified IPC Trainers
  • General requirements such as safety, tools and electrostatic discharge (ESD)
  • Wire and terminal assembly requirements, demonstrations and laboratory
  • Through hole technology requirements, demonstrations and laboratory
  • Surface mount technology requirements, demonstrations and laboratory
  • General soldered connection acceptance requirements (including Lead Free)
  • Machine and reflow soldering process requirements
  • Test methods and related standards
  • Using statistical process control methodology

Mode of Instruction
Lecture, live on camera demonstration, hands-on practice, visuals.

Prescribed Texts
J-STD -001 Standard
IPC Professional Training and Certification Policies and Procedures

Note: Everyone who successfully completes the program will receive instructional materials necessary for conducting Certified IPC Specialist Recertification Training.

Reference Material

Required Supplies

Promotion Policy

Grading Policy
A+ 90%  to  100%
A 80%  to  89%
B+ 75%  to  79%
B 70%  to  74%
C+ 65%  to  69%
C 60%  to  64%
D+ 55%  to  59%
D 50%  to  54%
F 0%    to  49% (Not a Pass)
EXC Excellent
SAT Satisfactory
UNSAT Unsatisfactory

For further information, see a copy of the Academic Policy, available online (http://www.senecacollege.ca/academic-policy) or at Seneca's Registrar's Offices.

Modes of Evaluation
The student must prove their mastery of the specification by passing a 75 question open book and a 25 question closed book test with an average score of 80% or higher, and complete the workmanship skill tests at an acceptable level.

Grading Policy

80%-100%- SAT
0-79%   -     UNSAT

Vince Bennici

Approved by: Barb Shannon, Denis Gravelle, Sharon Estok